For netgear extender set up, do the following:

• Turn on the extender by plugging it into an electrical outlet.

• Connect to the network of the extender by going to the Wi-Fi settings on your device.

• Open a web browser and type the specified web address or the extender's default IP address, which is often 192.168.1.250.

• To configure the extender, adhere to the on-screen directions.

• Enter the network password for your current Wi-Fi network after selecting it.

• Put the extender in a good spot after finishing the setup phase.

• Your devices should be connected to the expanded Wi-Fi network.